User's Manual
24
Manipulation
This section describes the configuration of various manipulation processes.
24.1
Configuring General Settings
The General Settings page allows you to configure general manipulation parameters. For a
description of the parameters appearing on this page, see ''Configuration Parameters
Reference'' on page 727.
To configure the general manipulation parameters:
1.
Open the General Settings page (Configuration tab > VoIP menu > GW and IP to IP
> Manipulations >General Settings).
2.
Configure the parameters as required.
3.
Click Submit.
24.2
Configuring Source/Destination Number
Manipulation Rules
The number manipulation table lets you configure rules for manipulating source and
destination telephone numbers for IP-to-Tel and Tel-to-IP calls. The number manipulation
tables include the following:
Tel-to-IP calls:
•
Source Phone Number Manipulation Table for Tel > IP Calls (up to 120 entries)
•
Destination Phone Number Manipulation Table for Tel > IP Calls (up to 120
entries)
IP-to-Tel calls:
•
Source Phone Number Manipulation Table for IP > Tel Calls (up to 120 entries)
•
Destination Phone Number Manipulation Table for IP > Tel Calls (up to 120
entries)
Configuration of number manipulation rules includes two areas:
Rule: Defines the matching characteristics of the incoming call (e.g., prefix of
destination number).
Action: Defines the action that is done if the incoming call matches the characteristics
of the rule (e.g., removes a user-defined number of digits from the left of the number).
Version 6.8
Figure 24-1: General Settings Page
399
24. Manipulation
Mediant 3000