User's Manual
51.10.5.2
Call Waiting Parameters
The call waiting parameters are described in the table below.
Parameter
Web/EMS: Enable Call
Waiting
[EnableCallWaiting]
EMS: Send 180 For Call
Waiting
[Send180ForCallWaiting]
51.10.5.3
Call Forwarding Parameters
The call forwarding parameters are described in the table below.
Parameter
Web: Enable Call
Forward
[EnableForward]
Version 6.8
Table 51-45: Call Waiting Parameters
Enables the Call Waiting feature.
[0] Disable
[1] Enable (Default)
If enabled and the device initiates a Tel-to-IP call to a destination that is
busy, it plays a call waiting ringback tone to the caller. The tone is
played only if the destination returns a 182 "Queued" SIP response.
Note: The device's Call Progress Tones (CPT) file must include a Call
Waiting ringback tone.
Determines the SIP response code for indicating Call Waiting.
[0] = (Default) Use 182 Queued response to indicate call waiting.
[1] = Use 180 Ringing response to indicate call waiting.
Table 51-46: Call Forwarding Parameters
Enables the Call Forwarding feature.
[0] Disable
[1] Enable (Default)
Notes:
To use this service, the devices at both ends must support this option.
For the device to respond to SIP 3xx responses with a new SIP request
(forwarding the original request), set this parameter to Enable.
51. Configuration Parameters Reference
Description
Description
855
Mediant 3000