AudioCodes Mediant 3000 User Manual page 773

User's Manual
Parameter
IPSec Proposal Table
Web: IP Security Proposal
Table
EMS: IPSec Proposal Table
[IPSecProposalTable]
Version 6.8
IPsecSATable_SourcePort, IPsecSATable_DestPort,
IPsecSATable_Protocol, IPsecSATable_Phase1SaLifetimeInSec,
IPsecSATable_Phase2SaLifetimeInSec,
IPsecSATable_Phase2SaLifetimeInKB, IPsecSATable_DPDmode,
IPsecSATable_IPsecMode, IPsecSATable_RemoteTunnelAddress,
IPsecSATable_RemoteSubnetIPAddress,
IPsecSATable_RemoteSubnetPrefixLength,
IPsecSATable_InterfaceName;
[ \IPsecSATable ]
Note: For a detailed description of this table, see ''Configuring IP
Security Associations Table'' on page 173.
This table parameter defines up to four IKE proposal settings, where
each proposal defines an encryption algorithm, an authentication
algorithm, and a Diffie-Hellman group identifier.
[ IPsecProposalTable ]
FORMAT IPsecProposalTable_Index =
IPsecProposalTable_EncryptionAlgorithm,
IPsecProposalTable_AuthenticationAlgorithm,
IPsecProposalTable_DHGroup;
[ \IPsecProposalTable ]
For example:
IPsecProposalTable 0 = 3, 2, 1;
IPsecProposalTable 1 = 2, 2, 1;
In the example above, two proposals are defined:

Proposal 0: AES, SHA1, DH group 2

Proposal 1: 3DES, SHA1, DH group 2
Note: For a detailed description of this table, see ''Configuring IP
Security Proposal Table'' on page 171.
773
51. Configuration Parameters Reference
Description
Mediant 3000