8.2
Establishing a CLI Session
The device's CLI can be accessed using any of the following methods:
RS-232: The device can be accessed through its RS-232 serial port, by connecting a
VT100 terminal to it or using a terminal emulation program (e.g., HyperTerminal) with
a PC. For connecting to the CLI through RS-232, see ''CLI'' on page 37.
Secure SHell (SSH): The device can be accessed through its Ethernet interface by
the SSH protocol using SSH client software. A popular and freeware SSH client
software is Putty, which can be downloaded from
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Telnet: The device can be accessed through its Ethernet interface by the Telnet
protocol using Telnet client software.The following procedure describes how to
establish a CLI session with the device.
The following procedure describes how to access the CLI through Telnet/SSH.
Notes:
•
The CLI login credentials are the same as all the device's other management
interfaces (such as Web interface). The default username and password is
"Admin" and "Admin" (case-sensitive), respectively. For configuring login
credentials, see ''Configuring Web User Accounts'' on page 69.
•
Only the primary User Account, which has Security Administration access level
(200), can access the device using Telnet.
To establish a CLI session with the device:
1.
Connect the device to the network.
2.
Establish a Telnet or SSH session using the device's OAMP IP address.
3.
Log in to the session using the username and password assigned to the Admin user of
the Web interface:
a.
At the login prompt, type the username, and then press Enter:
login: Admin
b.
At the password prompt, type the password, and then press Enter:
password: Admin
Once logged in, the current directory (root), available commands, available subdirectories,
and a welcome message are displayed at the CLI prompt:
login: Admin
password:
ready. Type "exit" to close the connection.
SIP/ SECurity/ PStn/ DebugRecording/ MGmt/ ControlProtocol/ CONFiguration/
IPNetworking/ TPApp/ BSP/
PING SHow
/>
User's Manual
84
Mediant 3000
Document #: LTRT-89738