Advanced User Accounts Configuration - AudioCodes Mediant 3000 User Manual

Gateway & enterprise sbc, family of media gateways & session border controllers
Hide thumbs Also See for Mediant 3000:
Table of Contents

Advertisement

2.
To change the username of an account:
a.
In the 'User Name' field, enter the new user name.
b.
Click Change User Name; if you are currently logged in to the Web interface with
this account, the 'Web Login' dialog box appears.
c.
Log in with your new user name.
3.
To change the password of an account:
a.
In the 'Current Password' field, enter the current password.
b.
In the 'New Password' and 'Confirm New Password' fields, enter the new
password.
c.
Click Change Password; if you are currently logged in to the Web interface with
this account, the 'Web Login' dialog box appears.
d.
Log in with your new password.
4.
To change the access level of the optional, second account:
a.
Under the Account Data for User: User group, from the 'Access Level' drop-
down list, select a new access level user.
b.
Click Change Access Level; the new access level is applied immediately.
7.3.2

Advanced User Accounts Configuration

The Web Users table lets you configure advanced Web user accounts. This configuration
is relevant only if you need the following management schemes:
Enhanced security settings per Web user (e.g., limit session duration)
More than two Web user accounts (up to 10 Web user accounts)
Master users
Notes:
Only the Security Administrator user can initially access the Web Users table.
Only Security Administrator and Master users can add, edit, or delete users.
Admin users have read-only privileges in the Web Users table; Monitor users have
no access to this table.
For advanced user accounts, up to five users can be concurrently logged in to the
Web interface, and they can be the same user.
If you delete a user who is currently in an active Web session, the user is
immediately logged off by the device.
All users can change their own passwords. This is done in the WEB Security
Settings page (see ''Configuring Web Security Settings'' on page 77).
To remove the Web Users table and revert to the Web User Accounts page with
the pre-configured, default Web user accounts, set the ResetWebPassword ini file
parameter to 1. This also deletes all other Web users.
Once the Web Users table is accessed, Monitor users and Admin users can only
change their passwords in the Web Security Settings page (see ''Configuring Web
Security Settings'' on page 77). The new password must have at least four
different characters than the previous password. (The Security Administrator users
and Master users can change their passwords in the Web Users table and in the
Web Security Settings page.)
User's Manual
72
Mediant 3000
Document #: LTRT-89738

Advertisement

Table of Contents
loading

Table of Contents