AudioCodes Mediant 3000 User Manual page 883

User's Manual
Parameter
Web/EMS: Outgoing Calls
Behavior
[ISDNOutCallsBehavior]
Version 6.8
protocol as specified in the ETS 300-403 standards for
Implicit Service 1.

[65536] GTD5 TBCT = CC implements the VERIZON-GTD-5
Switch variant of the TBCT Supplementary Service, as
specified in FSD 01-02-40AG Feature Specification
Document from Verizon. Otherwise, TBCT is implemented as
specified in GR-2865-CORE specification (default behavior).
Note: When using the ini file to configure the device to support
several ISDNGeneralCCBehavior features, add the individual
feature values. For example, to support both [16] and [32]
features, set ISDNGeneralCCBehavior = 48 (i.e., 16 + 32).
Determines several behaviour options (bit fields) that influence
the behaviour of the ISDN Stack outgoing calls. To select
options, click the arrow button, and then for each required option,
select 1 to enable. The default is 0 (i.e., disable).

[2] USER SENDING COMPLETE =The default behavior of
the device (when this bit is not set) is to automatically
generate the Sending-Complete IE in the Setup message.
This behavior is used when overlap dialing is not needed.
When overlap dialing is needed, set this bit and the behavior
is changed to suit the scenario, i.e., Sending-Complete IE is
added when required in the Setup message for Enblock mode
or in the last Digit with Overlap mode.

[16] USE MU LAW = The device sends G.711-m-Law in
outgoing voice calls. When disabled, the device sends G.711-
A-Law in outgoing voice calls.
Note: This option is applicable only to the Korean variant.

[128] DIAL WITH KEYPAD = The device uses the Keypad IE
to store the called number digits instead of the CALLED_NB
IE.
Note: This option is applicable only to the Korean variant
(Korean network). This is useful for Korean switches that
don't accept the CALLED_NB IE.

[256] STORE CHAN ID IN SETUP = The device forces the
sending of a Channel-Id IE in an outgoing Setup message
even if it's not required by the standard (i.e., optional) and no
Channel-Id has been specified in the establishment request.
This is useful for improving required compatibility with
switches. On PRI lines it indicates an unused channel ID,
preferred only.

[572] USE A LAW = The device sends G.711 A-Law in
outgoing voice calls. When disabled, the device sends the
default G.711-Law in outgoing voice calls.
Note: This option is applicable only to the E10 variant.

[1024] = Numbering plan/type for T1 IP-to-Tel calling
numbers are defined according to the manipulation tables or
according to the RPID header (default). Otherwise, the
plan/type for T1 calls are set according to the length of the
calling number.

[2048] = The device accepts any IA5 character in the
called_nb and calling_nb strings and sends any IA5 character
in the called_nb, and is not restricted to extended digits only
(i.e., 0-9,*,#).

[16384] DLCI REVERSED OPTION = Behavior bit used in
the IUA interface groups to indicate that the reversed format
883
51. Configuration Parameters Reference
Description
Mediant 3000