AudioCodes Mediant 3000 User Manual page 649

Gateway & enterprise sbc, family of media gateways & session border controllers

Hide thumbs Also See for Mediant 3000:

Table of Contents

User's Manual

For more graph functionality, see the following table:

Table 43-1: Additional Graph Functionality for Trunk Utilization

Remove button

Disable check box

Get Most Active button

Pause button

Zoom slide ruler and

Displays additional trunks in the graph. Up to five trunks can be

displayed simultaneously in the graph. To view another trunk, click this

button and then from the new 'Trunk' drop-down list, select the required

Each trunk is displayed in a different color, according to the legend

shown in the top-left corner of the graph.

Removes the selected trunk display from the graph.

Hides or shows an already selected trunk. Select this check box to

temporarily hide the trunk display; clear this check box to show the trunk.

This is useful if you do not want to remove the trunk entirely (using the

Remove button).

Displays only the trunk with the most active channels (i.e., trunk with the

most calls).

Pauses the display in the graph.

Resumes the display in the graph.

Increases or reduces the trunk utilization display resolution concerning

time. The Zoom In

button decreases it. Instead of using the buttons, you

can use the slide ruler. As you increase the resolution, more data is

displayed on the graph. The minimum resolution is about 30 seconds;

the maximum resolution is about an hour.

43. Performance Monitoring

button increases the time resolution; the

Mediant 3000