AudioCodes Mediant 3000 User Manual page 346

Parameter
Web: Diversion Mode
[IpProfile_SBCDiversionMode]
Web: History-Info Mode
[IpProfile_SBCHistoryInfoMode]
Web: Fax Coders Group ID
[IpProfile_SBCFaxCodersGroupI
D]
Web: Fax Behavior
[IpProfile_SBCFaxBehavior]
User's Manual
Defines the device's handling of the SIP Diversion header for this
SIP entity. For more information on interworking of the History-
Info and Diversion headers, see Interworking SIP Diversion and
History-Info Headers on page 506.

[0] As Is = (Default) Diversion header is not handled.

[1] Add = History-Info header is converted to a Diversion
header.

[2] Remove = Removes the Diversion header and the
conversion to the History-Info header depends on the settings
of the SBCHistoryInfoMode parameter.
Note: If the Diversion header is used, you can specify the URI
type (e.g., "tel:") to use in the header, using the
SBCDiversionUriType parameter.
Defines the device's handling of the SIP History-Info header for
this SIP entity. For more information on interworking of the
History-Info and Diversion headers, see Interworking SIP
Diversion and History-Info Headers on page 506.

[0] As Is = (Default) History-Info header is not handled.

[1] Add = Diversion header is converted to a History-Info
header.

[2] Remove = History-Info header is removed from the SIP
dialog and the conversion to the Diversion header depends on
the settings of the SBCDiversionMode parameter.
Assigns a Coders Group ID to define the supported fax coders for
fax negotiation for this SIP entity. For configuring Coder Groups,
see Configuring Coder Groups on page 325.
Note: The parameter is applicable only if you set the
IpProfile_SBCFaxBehavior parameter to a value other than [0].
Defines the fax-offer negotiation method for this SIP entity.

[0] As Is = (Default) Pass fax transparently, without
interference.

[1] Handle always = Handle fax according to fax settings in the
IP Profile for all offer-answer transactions (including the initial
INVITE).

[2] Handle on re-INVITE = Handle fax according to fax
settings in the IP Profile for all re-INVITE offer-answer
transactions (except for initial INVITE).
Note: The fax settings in the IP Profile include
IpProfile_SBCFaxCodersGroupID, IpProfile_SBCFaxOfferMode,
and IpProfile_SBCFaxAnswerMode.
346
Description
Document #: LTRT-89738
Mediant 3000