Mediant - AudioCodes Mediant 3000 User Manual

Gateway & enterprise sbc, family of media gateways & session border controllers
Hide thumbs Also See for Mediant 3000:
Table of Contents

Advertisement

Registering Users: The device can register each PBX user configured in the User
Info table. For each user, the device sends a SIP REGISTER to an external IP-based
Registrar server, using the "global" number in the From/To headers. If authentication
is necessary for registration, the device sends the user's username and password,
configured in the User Info table, in the SIP MD5 Authorization header.
You can configure up to 5,000 mapping rules in the GW User Info table. These rules can
be configured using any of the following methods:
Web interface - see ''Configuring GW User Info Table in Web Interface'' on page
Loadable User Info file - see ''Configuring GW User Info Table in Loadable Text File''
on page
Notes:
To enable user registration, set the following parameters on the Proxy &
Registration page (Configuration tab > VoIP menu > SIP Definitions > Proxy &
Registration) as shown:
38.1.5.2.1 Configuring GW User Info Table in Web Interface
The following procedure describes how to configure and register users in the GW User Info
table in the Web interface.
Note:
If a User Info file is loaded to the device (as described in ''Configuring GW User
Info Table in Loadable Text File'' on page 603), all previously configured entries are
removed from the table in the Web interface and replaced with the entries from the
loaded User Info file.
To configure the GW User Info table in the Web interface:
1.
Open the GW User Info Table page (Configuration tab > VoIP menu > SIP
Definitions > User Information > GW User Info Table).
2.
Click Add: the following dialog box appears:
3.
Configure the GW User Info table parameters according to the table below.
4.
Click Submit.
5.
To save the changes to flash memory, see ''Saving Configuration'' on page 580.
User's Manual
603
'Enable Registration': Enable (IsRegisterNeeded is set to 1).
'Registration Mode': Per Endpoint (AuthenticationMode is set to 0).
Figure 38-2: GW User Info Table in Web Interface
602

Mediant 3000

602
Document #: LTRT-89738

Advertisement

Table of Contents
loading

Table of Contents