AudioCodes Mediant 3000 User Manual page 620

If BootP/DHCP servers are not found or when the device is reset using the Web interface
or SNMP, it retains its network parameters and attempts to load the cmp file and/or
configuration files from a preconfigured TFTP server. If a preconfigured TFTP server does
not exist, the device operates using the existing software and configuration files on its flash
memory.
Figure 39-1: BootP Request and DHCP Discovery upon Startup
Note: By default, the duration between BootP/DHCP requests sent by the device is
one second (configured by the BootPDelay ini file parameter). By default, the number
of requests is three (configured by the BootPRetries ini file parameter).
User's Manual 620
Mediant 3000
Document #: LTRT-89738