Fax/Modem Operating Modes - AudioCodes Mediant 3000 User Manual

Gateway & enterprise sbc, family of media gateways & session border controllers
Hide thumbs Also See for Mediant 3000:
Table of Contents

Advertisement

Notes:
Unless otherwise specified, the configuration parameters mentioned in this section
are available on this page.
Some SIP parameters override these fax and modem parameters. For example,
the IsFaxUsed parameter and V.152 parameters in Section ''V.152 Support'' on
page 194.
For a detailed description of the parameters appearing on this page, see
''Configuration Parameters Reference'' on page 727.
To access the fax and modem parameters:
1.
Open the Fax/Modem/CID Settings page (Configuration tab > VoIP menu > Media >
Fax/Modem/CID Settings).
2.
Configure the parameters, as required.
3.
Click Submit.

15.2.1 Fax/Modem Operating Modes

The device supports two modes of operation:
Fax/modem negotiation that is not performed during the establishment of the call.
User's Manual
180
Mediant 3000
Document #: LTRT-89738

Advertisement

Table of Contents
loading

Table of Contents