AudioCodes Mediant 3000 User Manual page 541

User's Manual
Parameter
Source Username Prefix
[IP2IPRouting_SrcUsernamePrefix]
Source Host
[IP2IPRouting_SrcHost]
Destination Username Prefix
[IP2IPRouting_DestUsernamePrefix]
Destination Host
[IP2IPRouting_DestHost]
Request Type
[IP2IPRouting_RequestType]
Message Condition
[IP2IPRouting_MessageCondition]
ReRoute IP Group ID
[IP2IPRouting_ReRouteIPGroupID]
Call Trigger
[IP2IPRouting_Trigger]
Version 6.8
The default is -1. To denote any IP Group, leave this field
empty.
Defines the prefix of the user part of the incoming SIP
dialog's source URI (usually the From URI). You can use
special notations for denoting the prefix. To denote calls
without a user part in the URI, use the $ sign. For available
notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 725.
The default is the asterisk (*) symbol (i.e., any prefix). If this
rule is not required, leave this field empty.
Defines the host part of the incoming SIP dialog's source
URI (usually the From URI).
The default is the asterisk (*) symbol (i.e., any host name). If
this rule is not required, leave this field empty.
Defines the prefix of the incoming SIP dialog's destination
URI (usually the Request URI) user part. You can use
special notations for denoting the prefix. To denote calls
without a user part in the URI, use the $ sign. For available
notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 725.
The default is the asterisk (*) symbol (i.e., any prefix). If this
rule is not required, leave this field empty.
Defines the host part of the incoming SIP dialog's
destination URI (usually the Request-URI).
The default is the asterisk (*) symbol (i.e., any destination
host). If this rule is not required, leave this field empty.
Defines the SIP dialog request type of the incoming SIP
dialog.

[0] All (default)

[1] INVITE

[2] REGISTER

[3] SUBSCRIBE

[4] INVITE and REGISTER

[5] INVITE and SUBSCRIBE

[6] OPTIONS
Assigns a SIP message Condition rule. To configure
Condition rules, see ''Configuring Message Condition Rules''
on page 535.
Defines the IP Group that initiated (sent) the SIP redirect
response (e.g., 3xx) or REFER message. This field is
typically used for re-routing requests (e.g., INVITEs) when
interworking is required for SIP 3xx redirect responses or
REFER messages. For more information, see ''Interworking
SIP 3xx Redirect Responses'' on page
''Interworking SIP REFER Messages'' on page 507,
respectively. This parameter functions together with the 'Call
Trigger' field (see below).
The default is -1 (i.e., not configured).
Defines the reason (i.e, trigger) for re-routing the SIP
request:
541
29. SBC Configuration
Description
504 and
Mediant 3000