AudioCodes Mediant 3000 User Manual page 327

User's Manual
2. Click Add; the following dialog box appears:
3. Configure a Tel Profile according to the parameters described in the table below. For a
description of each parameter, refer to the corresponding "global" parameter.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 20-4: Tel Profile Table Parameters and Corresponding Global Parameters
Tel Profile Parameter
Common
Web: Index
[TelProfile_Index]
Web: Profile Name
[TelProfile_ProfileName]
Web: Profile Preference
[TelProfile_TelPreference]
Web: Fax Signaling Method
[TelProfile_IsFaxUsed]
Version 6.8
Figure 20-3: Tel Profile Settings Page
Defines an index number for the new table record.
Defines an arbitrary name to easily identify the Tel Profile.
The valid value is a string of up to 20 characters.
Defines the priority of the Tel Profile, where 1 is the lowest
priority and 20 the highest priority.
Notes:
1. If both the IP Profile and Tel Profile apply to the same
call, the coders and common parameters of the Preferred
profile are applied to the call.
2. If the Preference of the Tel Profile and IP Profile are
identical, the Tel Profile parameters are applied.
3. If the coder lists of both the IP Profile and Tel Profile
apply to the same call, only the coders common to both
are used. The order of the coders is determined by the
preference.
IsFaxUsed
327
20. Coders and Profiles
Global Parameter
Mediant 3000