AudioCodes Mediant 3000 User Manual page 552

Parameter
Manipulation Purpose
[IPInboundManipulation_Manipulati
onPurpose]
Source IP Group ID
[IPInboundManipulation_SrcIpGrou
p]
Source Username Prefix
[IPInboundManipulation_SrcUserna
mePrefix]
Source Host
[IPInboundManipulation_SrcHost]
Destination Username Prefix
[IPInboundManipulation_DestUsern
amePrefix]
Destination Host
[IPInboundManipulation_DestHost]
Request Type
[IPInboundManipulation_RequestTy
pe]
User's Manual
Defines the purpose of the manipulation:

[0] Normal = (Default) Inbound manipulations affect the
routing input and source and/or destination number.

[1] Routing input only = Inbound manipulations affect the
routing input only, retaining the original source and
destination number.

[2] Shared Line = Used for the Shared-Line Appearance
feature. This manipulation is for registration requests to
change the destination number of the secondary
extension numbers to the primary extension. For more
information, see ''BroadSoft's Shared Phone Line Call
Appearance for SBC Survivability'' on page 513.
Defines the IP Group from where the incoming INVITE is
received.
The default is -1 (i.e., any IP Group).
Defines the prefix of the source SIP URI user name (usually
in the From header).
The default is the asterisk (*) symbol (i.e., any source
username prefix).
Note: The prefix can be a single digit or a range of digits. For
available notations, see ''Dialing Plan Notation for Routing
and Manipulation'' on page 725.
Defines the source SIP URI host name - full name (usually in
the From header).
The default is the asterisk (*) symbol (i.e., any host name).
Defines the prefix of the destination SIP URI user name,
typically located in the Request-URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination
username prefix).
Note: The prefix can be a single digit or a range of digits. For
available notations, see ''Dialing Plan Notation for Routing
and Manipulation'' on page 725.
Defines the destination SIP URI host name - full name,
typically located in the Request-URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination
host name).
Defines the SIP request type to which the manipulation rule
is applied.

[0] All = (Default) All SIP messages.

[1] INVITE = All SIP messages except REGISTER and
SUBSCRIBE.

[2] REGISTER = Only REGISTER messages.

[3] SUBSCRIBE = Only SUBSCRIBE messages.

[4] INVITE and REGISTER = All SIP messages except
SUBSCRIBE.

[5] INVITE and SUBSCRIBE = All SIP messages except
REGISTER.
552
Description
Document #: LTRT-89738
Mediant 3000