AudioCodes Mediant 3000 User Manual page 474

1. Enable location-based emergency routing, by loading an ini file to the device with the
following parameter setting:
E911Gateway = 2
2. In the Destination Phone Number Manipulation Table for IP-to-Tel Calls
(Configuration tab > VoIP menu > GW and IP to IP > Manipulations > Dest
Number IP->Tel), add the following two rules for manipulating the destination number
of incoming emergency calls, based on ELIN numbers:
Figure 27-6: Destination Number Manipulation Rules for Location-Based Emergency Routing
Index 0 manipulates the destination number for London emergency callers; Index 1
manipulates the destination number for Manchester emergency callers.
27.5.2.4.5 Viewing the ELIN Table
You can view the ELIN table of the ELIN Gateway:

Using Syslog, by invoking the following Web command shell:
SIP / GateWay / E911Dump
User's Manual 474
Mediant 3000
Document #: LTRT-89738