AudioCodes Mediant 3000 User Manual page 254

Parameter
Condition
[CallSetupRules_Condition]
Action Subject
[CallSetupRules_ActionSubject]
Action Type
[CallSetupRules_ActionType]
User's Manual
Defines the condition that must exist for the device to
perform the action.
The valid value is a string of up to 200 characters (case-
insensitive). Regular Expression (regex) can also be used,
for example:

ldap.attr.mobile exists (attribute "mobile" exists in AD)

param.call.dst.user == ldap.attr.msRTCSIP-PrivateLine
(called number is the same as the number in the attribute
"msRTCSIP-PrivateLine")

ldap.found !exists (LDAP record not found)

ldap.err exists (LDAP error exists)
Defines the element (header, parameter, or body) upon
which you want to perform the action.
The valid value is a string of up to 100 characters (case-
insensitive).
Examples:

header.from contains '1234' (SBC calls only)

param.call.dst.user (called number)

param.call.src.user (calling number)

param.call.src.name (calling name)

param.call.redirect (redirect number)

param.call.src.host (source host)

param.call.dst.host (destination host)
Defines the type of action to perform.

[0] Add (default) = Adds new message header,
parameter or body elements.

[1] Remove = Removes message header, parameter, or
body elements.

[2] Modify = Sets element to the new value (all element
types).

[3] Add Prefix = Adds value at the beginning of the string
(string element only).

[4] Add Suffix = Adds value at the end of the string
(string element only).

[5] Remove Suffix = Removes value from the end of the
string (string element only).

[6] Remove Prefix = Removes value from the beginning
of the string (string element only).

[20] Run Rules Set = Performs a different Rule Set ID,
specified in the 'Action Value' parameter (below).

[21] Exit = Stops the Rule Set ID and returns a result
("True" or "False").
254
Mediant 3000
Description
Document #: LTRT-89738