AudioCodes Mediant 3000 User Manual page 411

User's Manual
Notes:
•
If the device copies the received destination number to the outgoing SIP redirect
number (enabled by the CopyDest2RedirectNumber parameter), no redirect
number Tel-to-IP manipulation is done.
•
The manipulation rules are done in the following order: Stripped Digits From Left,
Stripped Digits From Right, Number of Digits to Leave, Prefix to Add, and then
Suffix to Add.
•
The device uses the 'Redirect Prefix' parameter before it manipulates the prefixi.
The following procedure describes how to configure redirect number manipulation rules in
the Web interface. You can also configure these rules using the following management
tools:

Redirect Number IP to Tel table: ini file parameter, RedirectNumberMapIp2Tel

Redirect Number Tel to IP table: ini file parameter, RedirectNumberMapTel2Ip

To configure a redirect number manipulation rule:
1. Open the redirect number manipulation table (Configuration tab > VoIP menu > GW
and IP to IP > Manipulations > Redirect Number Tel > IP or Redirect Number IP >
Tel).
2. Click Add; the following dialog box appears (e.g., Redirect Number Tel-to-IP table):
Figure 24-4: Redirect Number Manipulation (e.g., Tel to IP)
3. Configure a manipulation rule according to the parameters described in the table
below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 24-4: Redirect Number Manipulation Tables Parameter Description
Parameter
Index
[_Index]
Manipulation Name
[_ManipulationName]
Matching Characteristics - Rule
Web/EMS: Destination Prefix
[_DestinationPrefix]
Version 6.8
Defines an index number for the new table record.
Defines an arbitrary name to easily identify the manipulation rule.
The valid value is a string of up to 20 characters.
Defines the destination (called) telephone number prefix.
The default value is the asterisk (*) symbol (i.e., any number).
For manipulating the diverting and redirected numbers for call
411
Description
24. Manipulation
Mediant 3000