AudioCodes Mediant 3000 User Manual page 536


To configure a Message Condition rule:
1. Open the Message Condition Table page (Configuration tab > VoIP menu > SBC >
Routing SBC > Message Condition Table).
2. Click Add; the following dialog box appears:
Figure 29-7: Condition Table Page - Add Record Dialog Box
3. Configure a Message Condition rule according to the parameters described in the
table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
An example of configured Message Condition rules is shown in the figure below:

Index 0: Incoming SIP dialog that is classified as belonging to a User-type IP Group.

Index 1: Incoming SIP dialog that contains a SIP Via header.

Index 2: Incoming SIP dialog with 101 as the user part in the SIP From header.
Table 29-5: Message Condition Table Parameter Descriptions
Parameter
Index
[ConditionTable_Index]
Condition
[ConditionTable_Condition]
Description
[ConditionTable_Description]
User's Manual
Figure 29-8: Condition Table Page
Defines an index number for the new table record.
Defines the Condition rule of the SIP message.
The valid value is a string.
Note: User and host parts must be enclosed in single quotes.
Defines a brief description of the Condition rule.
536
Description
Document #: LTRT-89738
Mediant 3000