Srtp Parameters - AudioCodes Mediant 3000 User Manual

User's Manual
Parameter
[HTTPSRootFileName]
[HTTPSPkeyFileName]
[HTTPSCertFileName]

51.4.3 SRTP Parameters

The Secure Real-Time Transport Protocol (SRTP) parameters are described in the table
below.
Parameter
Web: Media Security
EMS: Enable Media Security
[EnableMediaSecurity]
Version 6.8

For this parameter to take effect, a device reset is required.

For a description on implementing client certificates, see TLS
for Remote Device Management on page 119.
Defines the name of the HTTPS trusted root certificate file to be
loaded using TFTP. The file must be in base64-encoded PEM
(Privacy Enhanced Mail) format.
The valid range is a 47-character string.
Note: This parameter is applicable only when the device is
loaded using BootP/TFTP.
Defines the name of a private key file (in unencrypted PEM
format) to be loaded from the TFTP server.
Defines the name of the HTTPS server certificate file to be
loaded using TFTP. The file must be in base64-encoded PEM
format.
The valid range is a 47-character string.
Note: This parameter is only applicable when the device is
loaded using BootP/TFTP.
Table 51-26: SRTP Parameters
Enables Secure Real-Time Transport Protocol (SRTP).

[0] Disable (default)

[1] Enable
Notes:

For this parameter to take effect, a device reset is required.

SRTP causes a reduction of 12.5% in available channels (i.e.,
84 channels instead of 96 per DSP) when using DSP Template
0. In other words, instead of 2,016 (21 * 96) channels, 1,764 (21
* 84) are available. For a depopulated system, 504 channels
are available (6 * 84). The DSP-depopulated blade is used for
configurations with 21 spans and less. Therefore, no capacity
reduction occurs in these sizes for T1 configurations (504/24 =
21 T1s). However, only 15 E1s instead of 16 (504/32 = 15.75)
may be available.
765
51. Configuration Parameters Reference
Description
Description
Mediant 3000