AudioCodes Mediant 3000 User Manual page 702

Parameter
Capture Type
[LoggingFilters_CaptureType]
User's Manual
Enables debug recordings for the defined logging filter and defines
what to record:

[0] None (default)

[1] Signaling = Information related to signaling such as SIP
signaling messages, Syslog, CDR, and the device's internal
processing messages.

[2] Signaling & Media = Signaling and media (RTP/RTCP/T.38).

[3] Signaling & Media & PCM = Signaling, media, and PCM
(voice signals from and to TDM).

[4] PSTN trace = ISDN and CAS traces - applicable only for
Trunk-related filters.
Note: This parameter is not applicable when 'Filter Type' is set to
IP Trace.
702
Description
Document #: LTRT-89738
Mediant 3000