AudioCodes Mediant 3000 User Manual page 935

User's Manual
Parameter
Destination Telcom to IPs
[NumberMapTel2IP]
Source Phone Number Manipulation for IP-to-Tel Calls Table
Web: Source Phone Number
Manipulation Table for IP > Tel
Calls
EMS: SIP Manipulations >
Source IP to Telcom
[SourceNumberMapIP2Tel]
EMS: Perform Additional
IP2TEL Source Manipulation
[PerformAdditionalIP2TELSo
urceManipulation]
Source Phone Number Manipulation for Tel-to-IP Calls Table
Web: Source Phone Number
Manipulation Table for Tel > IP
Calls
EMS: SIP Manipulations >
Source Telcom to IP
[SourceNumberMapTel2IP]
Version 6.8
NumberMapTel2Ip_ManipulationName,
NumberMapTel2Ip_DestinationPrefix,
NumberMapTel2Ip_SourcePrefix,
NumberMapTel2Ip_SourceAddress,
NumberMapTel2Ip_NumberType, NumberMapTel2Ip_NumberPlan,
NumberMapTel2Ip_RemoveFromLeft,
NumberMapTel2Ip_RemoveFromRight,
NumberMapTel2Ip_LeaveFromRight,
NumberMapTel2Ip_Prefix2Add, NumberMapTel2Ip_Suffix2Add,
NumberMapTel2Ip_IsPresentationRestricted,
NumberMapTel2Ip_SrcTrunkGroupID, NumberMapTel2Ip_
SrcIPGroupID;
[\NumberMapTel2Ip]
For a detailed description of this table, see ''Configuring
Source/Destination Number Manipulation'' on page 399.
This parameter table manipulates the source number for IP-to-Tel
calls. The format of the ini file table parameter is as follows:
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_ManipulationName,
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
SourceNumberMapIp2Tel_NumberPlan,
SourceNumberMapIp2Tel_RemoveFromLeft,
SourceNumberMapIp2Tel_RemoveFromRight,
SourceNumberMapIp2Tel_LeaveFromRight,
SourceNumberMapIp2Tel_Prefix2Add,
SourceNumberMapIp2Tel_Suffix2Add,
SourceNumberMapIp2Tel_IsPresentationRestricted;
[\SourceNumberMapIp2Tel]
For a detailed description of this table, see ''Configuring
Source/Destination Number Manipulation'' on page 399.
Enables additional source number manipulation for IP-to-Tel calls.
The additional manipulation is done on the initially manipulated
source number, and this additional rule is also configured in the
manipulation table (SourceNumberMapIP2Tel parameter). This
enables you to configure only a few manipulation rules for complex
number manipulation requirements (that generally require many
rules).

[0] = Disable (default)

[1] = Enable
This table parameter manipulates the source phone number for
Tel-to-IP calls. The format of the ini file table parameter is as
follows:
[SourceNumberMapTel2Ip]
FORMAT SourceNumberMapTel2Ip_Index =
SourceNumberMapTel2Ip_ManipulationName,
SourceNumberMapTel2Ip_DestinationPrefix,
SourceNumberMapTel2Ip_SourcePrefix,
935
51. Configuration Parameters Reference
Description
Mediant 3000