ComAp IG-NT GC Reference Manual page 76

This setpoint is used for entering the domain name or IP address of the AirGate server. Use the free AirGate
server provided by ComAp at address airgate.comap.cz if your company does not operate it's own AirGate
server.
SMTP authent
Range DISABLED, ENABLED [-]
Switch this setpoint to ENABLED position if your
also adjust SMTP user name
information.
N :
OTE
Most of public free SMTP servers require authentification. You will get instructions when you register to the
freemail service.
SMTP user name
Range max. 32 characters [-]
Use this setpoint to enter the user name for the SMTP server if
SMTP password
Range max. 32 characters [-]
Use this setpoint to enter the password for the SMTP server if
SMTP address
Range max. 32 characters
C !
AUTION
Proper setting of SMTP-related setpoints as well as controller mailbox are essential for sending
mails.
This setpoint is used for entering the domain name (e.g. smtp.yourprovider.com) or IP address (e.g.
74.125.39.109) of the SMTP server. Please ask your internet provider or IT manager for this information.
N :
OTE
You may also use one of free SMTP servers, e.g. smtp.gmail.com. However, please note that some free
SMTP servers may cause delays (in hours..) when sending e-mails.
N :
OTE
If you do not want to send active e-mails, you may leave this setpoint blank, as well as other setpoints
related to SMTP server and e-mail settings.
Contr mailbox
Range max. 32 characters
Enter an existing e-mail address into this setpoint. This address will be used as sender address in active
e-mails that will be sent from the controller. Do not enter your or other recipient's e-mail address.
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
SMTP server
and SMTP password. Ask your internet provider or IT manager for this
requires authentificated access. You have
SMTP authentification is enabled.
SMTP authentification is enabled.
alerts via e-
76