ComAp IG-NT GC Reference Manual page 132

Value: Breaker state
Group Info
Units -
Related FW 3.2
Description Code of the current state of the breaker control. The text representation of each
code can be obtained by the procedure described at the value
Value: Timer text
Group Info
Units -
Related FW 3.2
Description Code of the currently running system process timer. The text representation of
each code can be obtained by the procedure described at the value
Remaining time of the timer is available in the value
Value: Timer val
Group Info
Units -
Related FW 3.2
Description The value contains remaining time of the currently running system process timer.
The name of the timer is available in the value
Value: NextTime1-4
Group Info
Units -
Related FW 3.2
Description This value contains time of next activation of the timer block 1-4 (i.e. of the output
TimerAct
N
OTE
More information about timers is available in the chapter
Value: NextDate1-4
Group Info
Units -
Related FW 3.2
Description This value contains date of next activation of the timer block 1-4 (i.e. of the output
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
1-4). The related date is available in the value NextDate1-4.
:
Engine state.
Engine
Timer val.
Timer text.
General purpose
state.
timers.
132