ComAp IG-NT GC Reference Manual page 110

Units kVA
Related FW 3.2
Description Generator apparent power in phase L3.
Value: Pwr factor
Group Gener values
Units -
Related FW 3.2
Description Generator cos-phi factor.
N
OTE
The "cos-phi" factor is widely used instead of power factor for pure harmonic
waveforms, because a simplified method can be used for calculation of it's value.
However, if this simplified method is used for significantly distorted waveforms, it
may provide inaccurate results. This fact causes the controller "power factor"
value may be different from a value measured by another true-rms measurement
device if the waveform contains significant portion of higher harmonic frequencies.
Value: Load char
Group Gener values
Units -
Related FW 3.2
Description Character of the generator load. "L" means inductive load, "C" is capacitive and
"R" is resistive load (power factor = 1).
Value: Pwr factor L1
Group Gener values
Units -
Related FW 3.2
Description Generator power factor in phase L1.
Value: Load char L1
Group Gener values
Units -
Related FW 3.2
Description Character of the generator load in the L1 phase. "L" means inductive load, "C" is
capacitive and "R" is resistive load (power factor = 1).
Value: Pwr factor L2
Group Gener values
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
:
110