ComAp IG-NT GC Reference Manual page 148

Binary input: Timer block 5
Related FW 3.2
Description This input is used to disable temporarily the output from the Timer channel #5.
N
OTE
See also the setpoint
N
OTE
See the chapter
Binary input: Timer block 6
Related FW 3.2
Description This input is used to disable temporarily the output from the Timer channel #6.
N
OTE
See also the setpoint
N
OTE
See the chapter
Binary input: Timer block 7
Related FW 3.2
This input is used to disable temporarily the output from the Timer channel #7.
Description
N
OTE
See also the setpoint
N
OTE
See the chapter
Binary input: Timer block 8
Related FW 3.2
Description This input is used to disable temporarily the output from the Timer channel #8.
N
OTE
See also the setpoint
N
OTE
See the chapter
Binary input: Timer block 9
Related FW 3.2
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
:
TimerChannel 5
:
Timers for more details about timers.
:
TimerChannel 6
:
Timers for more details about timers.
:
TimerChannel 7
:
Timers for more details about timers.
:
TimerChannel 8
:
Timers for more details about timers.
and output TimerAct 5-8.
and output TimerAct 5-8.
and output TimerAct 5-8.
and output TimerAct 5-8.
148