ComAp IG-NT GC Reference Manual page 197

Binary output: MCBButnEcho
Related FW 3.2
Description This output provides 1s pulse when:
Binary output: GCB status
Related FW 3.2
Description This output indicates the GCB position, how it is internally considered in the
controller. The position is based on
GCB fdb neg
The output can be used for indication of the GCB position.
Binary output: MCB status
Related FW 3.2
Description This output indicates the MCB position, how it is internally considered in the
controller. The position is based on
MCB fdb neg
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF

GCB close/open command is received via communication line or

the input GCBButton

MCB button is pressed on the controller front panel or

MCB button is pressed on any of external local/remote terminals or

MCB close/open command is received via communication line or

the input MCBButton
input.

If only the positive feedback input is used the output mirrors the feedback.

If both feedbacks are used and they match each other the output
indicates the GCB position according to the feedbacks.

If both feedbacks are used, however they do not match each other, the
output remains in previous position when they matched.
input.

If only the positive feedback input is used the output mirrors the feedback.

If both feedbacks are used and they match each other the output
indicates the MCB position according to the feedbacks.

If both feedbacks are used, however they do not match each other, the
output remains in previous position when they matched.
is activated.
is activated.
GCB feedback input and optionally also on the
MCB feedback input and optionally also on the
197