ComAp IG-NT GC Reference Manual page 164

Watch a training video about force value function here:
http://www.comap.cz/support/training/training-videos/.
N
OTE
See an example in the description of the binary input
Binary input: Force block 1
Related FW 3.2
Description This is one of six binary inputs used for user-defined blocking of protections. If the
input is active, all the protections that have Protection block type configured as
Force block 1 block type are blocked (i.e. temporarily disabled).
Binary input: Force block 2
Related FW 3.0
Description This is one of six binary inputs used for user-defined blocking of protections. If the
input is active, all the protections that have Protection block type configured as
Force block 2 block type are blocked (i.e. temporarily disabled).
Binary input: Force block 3
Related FW 3.2
Description This is one of six binary inputs used for user-defined blocking of protections. If the
input is active, all the protections that have Protection block type configured as
Force block 3 block type are blocked (i.e. temporarily disabled).
Binary input: Force block 4
Related FW 3.2
Description This is one of six binary inputs used for user-defined blocking of protections. If the
input is active, all the protections that have Protection block type configured as
Force block 4 block type are blocked (i.e. temporarily disabled).
Binary input: Force block 5
Related FW 3.2
Description This is one of six binary inputs used for user-defined blocking of protections. If the
input is active, all the protections that have Protection block type configured as
Force block 5 block type are blocked (i.e. temporarily disabled).
Binary input: Force block 6
Related FW 3.2
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
:
Force value 1.
164