ComAp IG-NT GC Reference Manual page 128

Value: LogBout 7
Group Log bout
Units -
Related FW 3.2
Description This is a bit array containing status of logical binary outputs 97-112 of the
controller. Bit0 represents LBO97, bit1 represents LBO98 etc..
N
OTE
All terminals display binary values in "human-readable" form - from left to right.
That means the bit 0 is displayed in the most left position. This is different from
common use in computer science, where binary values are displayed from right to
left.
Value: LogBout 8
Group Log bout
Units -
Related FW 3.2
Description This is a bit array containing status of logical binary outputs 113-128 of the
controller. Bit0 represents LBO113, bit1 represents LBO114 etc..
N
OTE
All terminals display binary values in "human-readable" form - from left to right.
That means the bit 0 is displayed in the most left position. This is different from
common use in computer science, where binary values are displayed from right to
left.
Value: LogBout 9
Group Log bout
Units -
Related FW 3.2
Description This is a bit array containing status of logical binary outputs 128-143 of the
controller. Bit0 represents LBO128, bit1 represents LBO129 etc..
N
OTE
All terminals display binary values in "human-readable" form - from left to right.
That means the bit 0 is displayed in the most left position. This is different from
common use in computer science, where binary values are displayed from right to
left.
Value: RemoteControl
Group Log bout
Units -
Related FW 3.2
This is a bit array containing status of the binary outputs
Description
Remote
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
:
:
:
control8.
Remote control1 ...
128