ComAp IG-NT GC Reference Manual page 113

Value: Gen V L2-L3
Group Gener values
Units V
Related FW 3.2
Description Generator voltage between phases L2 and L3.
N
OTE
The ratio between the voltage measured at the input terminals and the displayed
voltage is adjusted by the setpoint
Value: Gen V L3-L1
Group Gener values
Units V
Related FW 3.2
Description Generator voltage between phases L3 and L1.
N
OTE
The ratio between the voltage measured at the input terminals and the displayed
voltage is adjusted by the setpoint
Value: Gen curr L1
Group Gener values
Units A
Related FW 3.2
Description Generator current in phase L1.
N
OTE
The ratio between the current measured at the input terminals and the displayed
current is adjusted by the setpoints
Value: Gen curr L2
Group Gener values
Units A
Related FW 3.2
Description Generator current in phase L2.
N
OTE
The ratio between the current measured at the input terminals and the displayed
current is adjusted by the setpoints
Value: Gen curr L3
Group Gener values
Units A
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
:
:
:
:
VT ratio.
VT ratio.
CT ratio prim and CT ratio
CT ratio prim and CT ratio
sec.
sec.
113