ComAp IG-NT GC Reference Manual page 131

Description Bits of this value show "1" if the controller which has address corresponding with
the bit position plays active role in the power management. Bit 0 represents
address 1 etc. This value contains information about controllers with addresses 1-
16.
Value: Reg32
Group Info
Units -
Related FW 3.2
Description Bits of this value show "1" if the controller which has address corresponding with
the bit position plays active role in the power management. Bit 0 represents
address 17 etc. This value contains information about controllers with addresses
17-32.
Value: GL16
Group Info
Units -
Related FW 3.2
Description Bits of this value show "1" if the controller which has address corresponding with
the bit position has GCB closed. Bit 0 represents address 1 etc. This value
contains information about controllers with addresses 1-16.
Value: GL32
Group Info
Units -
Related FW 3.2
Description Bits of this value show "1" if the controller which has address corresponding with
the bit position has GCB closed. Bit 0 represents address 1 etc. This value
contains information about controllers with addresses 17-32.
Value: Engine state
Group Info
Units -
Related FW 3.2
Description Code of the current state of the engine control. The text representation of each
code can be obtained following way:
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
1. Open the archive in GenConfig and use the function File -> Generate Cfg
Image -> Comm. objects to create a list of all communication objects.
2. Open the file, find the row containing this value and look for the column
"Type". The column "Type" contains reference to a list of codes and their
representations located in the bottom part of the file.
131