ComAp IG-NT GC Reference Manual page 130

Value: SW Branch
Group Info
Units -
Related FW 3.2
Description Firmware branch code. Contains 1 in case of standard branches.
Value: PasswordDecode
Group Info
Units -
Related FW 3.2
Description This value contains encrypted serial number of the controller and administrator
password and is intended for retrieving of the lost password. Send this number
together with controller serial number to your distributor if you need to retrieve
your password.
Value: CAN16
Group Info
Units -
Related FW 3.2
Description Bits of this value show "1" if the controller receives messages from the controller
which has address corresponding with the bit position. Bit 0 represents address 1
etc. This value contains information about controllers with addresses 1-16.
N
OTE
The bit which corresponds to the own controller is always set to "1".
Value: CAN32
Group Info
Units -
Related FW 3.2
Description Bits of this value show "1" if the controller receives messages from the controller
which has address corresponding with the bit position. Bit 0 represents address
17 etc. This value contains information about controllers with addresses 17-32.
N
OTE
The bit which corresponds to the own controller is always set to "1".
Value: Reg16
Group Info
Units -
Related FW 3.2
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
:
:
130