ComAp IG-NT GC Reference Manual page 118

means inductive load, "C" is capacitive and "R" is resistive load.
Value: Object P
Group Mains values
Units kW
Related FW 3.2
Description Actual active power consumed by the object. This value is calculated as sum of
the
Value: Object Q
Group Mains values
Units kVAr
Related FW 3.2
Description Actual reactive power consumed by the object. This value is calculated as sum of
the
Value: Object PF
Group Mains values
Units -
Related FW 3.2
Description Cos-phi factor at the load. This value is computed indirectly from the values
Object P
Value: Object LChr
Group Mains values
Units -
Related FW 3.2
Description Character of the object load. This value is computed indirectly from the values
Object P
Value: MaxVectorS
Group Mains values
º
Units
Related FW 3.2
Description This is maximal measured value of vector shift of the generator voltage. The value
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
genset active power and the
genset reactive power and the
and Object Q.
and Object Q.
active power imported from the
reactive power imported from the
mains.
mains.
118