ComAp IG-NT GC Reference Manual page 126

Bit0 represents LBO1, bit1 represents LBO2 etc..
N
OTE
All terminals display binary values in "human-readable" form - from left to right.
That means the bit 0 is displayed in the most left position. This is different from
common use in computer science, where binary values are displayed from right to
left.
N
OTE
Click on button with "..." to get a clear list of BI names with their corresponding
values.
Value: LogBout 2
Group Log bout
Units -
Related FW 3.2
Description This is a bit array containing status of logical binary outputs 17-32 of the
controller. Bit0 represents LBO17, bit1 represents LBO18 etc..
N
OTE
All terminals display binary values in "human-readable" form - from left to right.
That means the bit 0 is displayed in the most left position. This is different from
common use in computer science, where binary values are displayed from right to
left.
N
OTE
Click on button with "..." to get a clear list of BI names with their corresponding
values.
Value: LogBout 3
Group Log bout
Units -
Related FW 3.2
Description This is a bit array containing status of logical binary outputs 33-48 of the
controller. Bit0 represents LBO33, bit1 represents LBO34 etc..
N
OTE
All terminals display binary values in "human-readable" form - from left to right.
That means the bit 0 is displayed in the most left position. This is different from
common use in computer science, where binary values are displayed from right to
left.
N
OTE
Click on button with "..." to get a clear list of BI names with their corresponding
values.
Value: LogBout 4
Group Log bout
Units -
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
:
:
:
:
:
:
126