ComAp IG-NT GC Reference Manual page 112

Value: Gen V L2-N
Group Gener values
Units V
Related FW 3.2
Description Generator voltage in phase L2.
N
OTE
The ratio between the voltage measured at the input terminals and the displayed
voltage is adjusted by the setpoint
Value: Gen V L3-N
Group Gener values
Units V
Related FW 3.2
Description Generator voltage in phase L3.
N
OTE
The ratio between the voltage measured at the input terminals and the displayed
voltage is adjusted by the setpoint
Value: Gen V
Group Gener values
Units V
Related FW 3.2
Description Generator voltage. Average from all three phases.
N
OTE
The ratio between the voltage measured at the input terminals and the displayed
voltage is adjusted by the setpoint
Value: Gen V L1-L2
Group Gener values
Units V
Related FW 3.2
Description Generator voltage between phases L1 and L2.
N
OTE
The ratio between the voltage measured at the input terminals and the displayed
voltage is adjusted by the setpoint
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
:
:
:
:
VT ratio.
VT ratio.
VT ratio.
VT ratio.
112