ComAp IG-NT GC Reference Manual page 186

internal temperature of the module.
This analog input is intended for measuement of this thermocouple compensation
temperature for the IS-AIN8 module with index #4.
N
OTE
Thermocouples without internal compensation "Thermo(nc)..." must be used for
this case.
Analog input: LdCtrl:TByPwr
Related FW 3.2
Description This functional input is used as the temperature input into the load control loop if
the loop is switched into "T BY PWR" position. More information is available at the
setpoint
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
:
Load ctrl PtM.
186