ComAp IG-NT GC Reference Manual page 138

Value: TotalDownTime
Group Statistics
Units h
Related FW 3.2
Description This counter counts while the controller is in "not ready" state, i.e. it can not be
started. The reason of the "not ready" state may be either some 2
the controller switched in OFF mode.
N
OTE
The counter can be readjusted/reset from InteliMonitor menu Monitor -> Set
statistics.
Value: DnTimeReqToRun
Group Statistics
Units h
Related FW 3.2
This counter counts while the controller is in "not ready" state (see the value
Description
downtime) and there is a request for the gen-set to run.
N
OTE
The counter can be readjusted/reset from InteliMonitor menu Monitor -> Set
statistics.
Value: PulseCounter 1
Group Statistics
Units -
Related FW 3.2
Description This is the value of PulseCounter #1 module. See the binary input
1.
Value: PulseCounter 2
Group Statistics
Units -
Related FW 3.2
Description This is the value of PulseCounter #2 module. See the binary input
2.
N
OTE
Available in IS-NT only.
Inteli NT GeCon-MARINE SPI, SW Version 3.2, ©ComAp – July 2015
IGS-NT-GeCon-MARINE-SPI-3.2.PDF
:
:
:
nd
level alarm or
Total
PulseCounter
PulseCounter
138