Setting The Default Router; Assigning The Dns Server - Cisco DPA 7630 Administration Manual

Chapter 5 Getting Started with the DPA 7630/7610

Setting the Default Router

Step 1
Step 2
Step 3
Step 4
Step 5

Assigning the DNS Server

Step 1
Step 2
Step 3
Step 4
Step 5
78-11069-03
You must enter the default router if you are not using DHCP. The DPA 7630/7610
automatically obtains a default router if you are using DHCP.
To set the default router, perform these steps:
From the main menu, choose Configure.
Choose Network interface.
Choose Default router.
Enter the IP address of the default router.
Restart the DPA 7630/7610.
Domain Name System (DNS) allows users to specify remote computers by host
names. The DPA 7630/7610 uses DNS to resolve the host name of TFTP servers
and Cisco CallManager systems when the system is configured to use names
rather than IP addresses.
To set the DNS server, perform these steps:
From the main menu, choose Configure.
Choose Network interface.
Choose DNS server.
You can enter a secondary DNS server by selecting Network interface >
Tip
DNS server 2 and entering the IP address.
Enter the IP address of the DNS server.
Restart the DPA 7630/7610.
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
Configuring Network Settings
5-9