Configuring L2Tp Class Options - Cisco ASR 9000 Series Configuration Manual

Provisioning PPP LAC Session
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 vpdn
Example:
RP/0/RSP0/CPU0:router(config)# vpdn
Step 3
l2tp session-id space hierarchical
Example:
RP/0/RSP0/CPU0:router(config-vpdn)# l2tp
session-id space hierarchical
Step 4
Use the commit or end command.
Configuring L2TP Session-ID Commands: An example
configure
vpdn
l2tp session-id space hierarchical
!
end

Configuring L2TP Class Options

Perform this task to configure the various options for L2TP class.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.2.x
82
Purpose
Enters global configuration mode.
Configures vpdn.
Enables the hierarchical session-ID allocation algorithm.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Establishing Subscriber Sessions
OL-26148-02