Line Enable Section - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Voice tab > Line page

Line Enable section

Line Enable
Voice tab > Line page
Network Settings section
SIP ToS/DiffServ Value
SIP CoS Value [0-7]
RTP ToS/DiffServ Value
RTP CoS Value [0-7]
Voice tab > Line page
SIP Settings section
SIP Transport
SIP Port
SIP 100REL Enable
To enable this line for service, select yes. Otherwise, select
no.
Default: yes
TOS/DiffServ field value in UDP IP packets carrying a SIP
message.
Default: 0x68
CoS value for SIP messages.
Default: 3
ToS/DiffServ field value in UDP IP packets carrying RTP data.
Default: 0xb8
CoS value for RTP data.
Default: 6
Options: UDP, TCP, or TLS
Default: UDP
Port number of the SIP message listening and transmission
port.
Default: 5060
To enable the support of 100REL SIP extension for reliable
transmission of provisional responses (18x) and use of
PRACK requests, select yes. Otherwise, select no.
Default: no
B
252