More Information And Training - Cisco Expressway CE1300 Installation Manual

Introduction
• The CE1300 can support up to 5000 Mobile and Remote Access registrations but ships with a
• The CE1300 is not shipped with power cables by default. However, they can be selected during the order
To add a CE1300 appliance to an existing cluster that has CE1300 models in it, configure the Type option to
match the other peers (Expressway-E or Expressway-C) through the service setup wizard on the Status >
Overview page, before you add the CE1300 to the cluster.
Note

More Information and Training

Training
Training is available online and at our training locations. Information about the courses we provide and the
location of our training offices is at the following link.
Glossary
A glossary of TelePresence terms is at link.
Related Documentation
• Detailed information about installing this appliance is provided in the
• Managing and operating Cisco Expressway software is described in the Cisco Expressway Administrator
• Creating and maintaining a cluster of Cisco Expressways is described in the Cisco Expressway Cluster
limited-capacity factory-loaded export-unrestricted Expressway image (maximum 2500 secured/crypto
sessions). If you are eligible for a full-capacity export restricted image, you must order Expressway
Select. For more information, see
X14.3.x (Includes X14.3 and X14.3.1
configuration. KVM cables are also not included, but Cisco part N20-BKVM= can be ordered separately
if needed.
CE1300 physical hardware uses Self-Encrypting-Disks (SED's) and ships with encryption disabled. To enable
encryption, see Enable Encryption on Self Encrypting
Installation and Service Guide.
Guide on the Expressway Maintain and Operate Guides
Creation and Maintenance Deployment Guide on the
Cisco Expressway and Cisco Expressway Select Release Note for
releases.
Disks.
page.
Expressway Configuration Guides
Cisco Expressway CE1300 Appliance Installation Guide (X14.3.1)
More Information and Training
Cisco UCS C220 M6S Server
page.
3