Trigger:timer<N>:Start:stimulus - Keithley 2461 Reference Manual

Model 2461 Interactive SourceMeter® Instrument Reference Manual
Details
This command configures the alarm of the timer.
When the timer is enabled, the timer starts immediately if the timer is configured for a start time that
has passed.
Example
TRIG:TIM1:STAR:SEC 60
TRIG:TIM1:START:FRAC 0.5
TRIG:TIM1:STAT ON
Also see
:TRIGger:TIMer<n>:STATe
:TRIGger:TIMer<n>:STARt:STIMulus
This command describes the event that starts the trigger timer.
Type
Command and query
Usage
:TRIGger:TIMer<n>:STARt:STIMulus <event>
:TRIGger:TIMer<n>:STARt:STIMulus?
<n>
<event>
Details
Set this attribute any trigger event to start the timer when that event occurs.
Set this attribute to zero (0) to disable event processing and use the timer as a timer or alarm based
on the start time.
2461-901-01 A/November 2015
(on page 6-242)
Affected by
Recall settings
Instrument reset
Power cycle
Trigger timer number (1 to 4)
The event that starts the trigger timer
Section 6: SCPI command reference
Set the timer for 60.5 s.
Enable the trigger timer for timer 1.
Where saved
Save settings
Default value
NONE
6-241