Model 2461 Interactive SourceMeter® Instrument Reference Manual
DISPlay subsystem
This subsystem contains commands that control the front-panel display.
:DISPlay:CLEar
This command clears the text from the front-panel USER swipe screen.
Type
Command only
Usage
:DISPlay:CLEar
Example
DISP:CLE
DISP:SCR SWIPE_USER
DISP:USER1:TEXT "Batch A122"
DISP:USER2:TEXT "Test running"
Also see
:DISPlay:USER<n>:TEXT[:DATA]
2461-901-01 A/November 2015
Affected by
Not applicable
(on page 6-43)
Section 6: SCPI command reference
Where saved
Not applicable
Clear the USER swipe screen and switch to
display the USER swipe screen.
Set the first line to read "Batch A122" and
the second line to display "Test running".
Default value
Not applicable
6-39