Source[1]:Configuration:list:query - Keithley 2461 Reference Manual

Model 2461 Interactive SourceMeter® Instrument Reference Manual

:SOURce[1]:CONFiguration:LIST:QUERy?

This command returns a list of TSP commands and parameter settings that are stored in the specified
configuration index.
Type
Query only
Usage
:SOURce[1]:CONFiguration:LIST:QUERy? "<name>", <point>
:SOURce[1]:CONFiguration:LIST:QUERy? "<name>", <point>, <fieldSeparator>
<name>
<point>
<fieldSeparator>
Details
This command can only return data for one configuration index. To get data for additional
configuration indexes, resend the command and specify different configuration indexes.
Refer to
source settings that the instrument stores in a source configuration list.
Example
:SOUR:CONF:LIST:QUER? "MySourceList", 2
Returns the TSP commands and parameter settings that represent the settings in configuration index 2.
Also see
Configuration lists
:SOURce[1]:CONFiguration:LIST:CREate
Instrument settings stored in a source configuration list
2461-901-01 A/November 2015
Affected by
Not applicable
A string that represents the name of a source configuration list
A number that defines a specific configuration index in the configuration list
A separator for the data:
•
•
•
Instrument settings stored in a source configuration list
(on page 3-30)
Where saved
Not applicable
Comma (default): 1
Semicolon: 2
New line: 3
(on page 6-83)
(on page 3-35)
Section 6: SCPI command reference
Default value
Not applicable
(on page 3-35) for a complete list of
6-85