Keithley 2461 Reference Manual page 300

Model 2461 Interactive SourceMeter® Instrument Reference Manual
Starting the trigger model
Using the front panel:
1. Press the front-panel TRIGGER key for 2 s. A dialog box displays the available trigger methods.
The presently selected method is highlighted.
2. Select Initiate Trigger Model.
3. If the instrument is controlled remotely, a confirmation screen is displayed. Select Yes to change
to front-panel control and start the trigger model.
Using SCPI commands:
Send the command:
:INITiate
Using TSP commands:
Send the command:
trigger.model.initiate()
Aborting the trigger model
You can stop the trigger model while it is in progress. When you stop the trigger model, all trigger
model commands on the instrument are terminated, including sweeps.
Using the front panel:
Press the TRIGGER key for 2 s and select Abort Trigger Model.
Using SCPI commands:
Send the command:
:ABORt
Using TSP commands:
Send the command:
trigger.model.abort()
2461-901-01 A/November 2015
Section 3: Functions and features
3-129