Model 2461 Interactive SourceMeter® Instrument Reference Manual
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
READ?
Model 2400 command
Model 2461 command
Notes
ROUTe subsystem
Model 2400 command
Model 2461 command
Notes
SENSe subsystem
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
2461-901-01 A/November 2015
:OUTPut[1]:ENABle:TRIPped?
Not available
:OUTPut[1]:INTerlock:TRIPped?
:OUTPut[1]:INTerlock:TRIPped?
:OUTPut[1]:SMODe
:OUTPut[1]:SMODe?
:OUTPut[1]:<function>:SMODe
VOLTage[:DC] or CURRent[:DC]
:OUTPut[1]:<function>:SMODe?
:OUTPut[1][:STATe]
:OUTPut[1][:STATe]?
:OUTPut[1][:STATe]
(on page 6-49)
:OUTPut[1][:STATe]?
:READ?
:READ?
(on page 6-9)
Model 2461 allows you to choose different buffers and which buffer elements to
access from the buffers when you send the command.
:ROUTe:TERMinals
:ROUTe:TERMinals?
:ROUTe:TERMinals
(on page 6-50)
:ROUTe:TERMinals?
[:SENSe[1]]:AVERage:COUNt
[:SENSe[1]]:AVERage:COUNt?
[:SENSe[1]]:<function>:AVERage:COUNt
is VOLTage[:DC], CURRent[:DC], or RESistance.
This is now set for each measurement function.
[:SENSe[1]]:AVERage[:STATe]
[:SENSe[1]]:AVERage[:STATe]?
[:SENSe[1]]:<function>:AVERage[:STATe]
is VOLTage[:DC], CURRent[:DC], or RESistance.
This is now set for each measurement function.
Appendix D: Convert Model 2400 to Model 2461 code
(on page 6-49)
(on page 6-47), where <function> is
(on page 6-53), where <function>
(on page 6-55), where <function>
D-13