Keithley 2461 Reference Manual page 1045

Model 2461 Interactive SourceMeter® Instrument Reference Manual
*STB?
This command gets the status byte of the instrument without clearing the request service bit.
Type
Query only
Usage
*STB?
Details
This command is similar to a serial poll, but it is processed like any other instrument command.
The *STB? command returns the same result as a serial poll, but the master summary bit (MSB) is
not cleared if a serial poll has occurred. The MSB is not cleared until all other bits feeding into the
MSB are cleared.
Example
*STB?
Also see
None
*TRG
This command generates a trigger event from a remote command interface.
Type
Command only
Usage
*TRG
Details
Use the *TRG command to generate a trigger event.
If you are using the SCPI command set, this command generates the COMMand event. If you are
using the TSP command set, this command generates the trigger.EVENT_COMMAND event. You
can use this constant as the stimulus of any trigger object, which causes that trigger object to respond
to the trigger events generated by *TRG. See
(on page 3-131).
Also see
:INITiate[:IMMediate]
2461-901-01 A/November 2015
Affected by
Not applicable
Affected by
Not applicable
(on page 6-182)
Where saved
Not applicable
Queries the status byte.
Where saved
Not applicable
Using trigger events to start actions in the trigger model
Appendix B: Common commands
Default value
Not applicable
Default value
Not applicable
B-9