Keithley 2461 Reference Manual page 431

Section 6: SCPI command reference
Example 1
CURR:AVER:COUNT 10
CURR:AVER:TCON MOV
CURR:AVER ON
Example 2
RES:AVER:COUNT 10
RES:AVER:TCON MOV
RES:AVER ON
Example 3
VOLT:AVER:COUNT 10
VOLT:AVER:TCON MOV
VOLT:AVER ON
Also see
Filtering measurement data
[:SENSe[1]]:<function>:AVERage[:STATe]
[:SENSe[1]]:<function>:AVERage:TCONtrol
6-54
Model 2461 Interactive SourceMeter® Instrument Reference Manual
(on page 4-23)
(on page 6-55)
(on page 6-56)
For current measurements, set the averaging
filter type to moving average, with a filter count of
10.
Enable the averaging filter.
For resistance measurements, set the averaging
filter type to moving average, with a filter count of
10.
Enable the averaging filter.
For voltage measurements, set the averaging
filter type to moving average, with a filter count of
10.
Enable the averaging filter.
2461-901-01 A/November 2015