Keithley 2461 Reference Manual page 1081
1kw pulse mode interactive sourcemeter instrument
Hide thumbs
Also See for 2461:
- Quick start manual (32 pages) ,
- Declassification and security instructions (6 pages) ,
- Quick start manual (25 pages)
Table of Contents
Advertisement
Model 2461 Interactive SourceMeter® Instrument Reference Manual
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
2461-901-01 A/November 2015
:CALCulate2:LIMit[1]:FAIL?
Not available
:CALCulate2:LIMit[1]:STATe
:CALCulate2:LIMit[1]:STATe?
Not available
To disable source limits, set the limit value to the maximum allowed by the
instrument
:CALCulate2:LIMit<x>:FAIL?
:CALCulate2:<function>:LIMit<Y>:FAIL?
VOLTage[:DC], CURRent[:DC], or RESistance
For :CALCulate2:LIMit4:FAIL?, which is related to contact check, use
:SYSTem:CCHeck?
(on page 6-142) or
142).
:CALCulate2:LIMit<x>:LOWer[:DATA]
:CALCulate2:LIMit<x>:LOWer[:DATA]?
:CALCulate2:<function>:LIMit<Y>:LOWer[:DATA]
<function> is VOLTage[:DC], CURRent[:DC], or RESistance
Note that this only available for two limits in the Model 2461.
:CALCulate2:LIMit<x>:LOWer:SOURce2
:CALCulate2:LIMit<x>:LOWer:SOURce2?
Not available
:CALCulate2:LIMit<x>:PASS:SOURce2
:CALCulate2:LIMit<x>:PASS:SOURce2?
Not available
:CALCulate2:LIMit<x>:STATe
:CALCulate2:LIMit<x>:STATe?
:CALCulate2:<function>:LIMit<Y>:STATe
is VOLTage[:DC], CURRent[:DC], or RESistance and <Y> is 1 or 2.
Note that this only available for two limits in the Model 2461.
To disable source limits, set the limit value to the maximum allowed by the
instrument.
:CALCulate2:LIMit<x>:UPPer[:DATA]
:CALCulate2:LIMit<x>:UPPer[:DATA]?
:CALCulate2:<function>:LIMit<Y>:UPPer[:DATA]
<function> is VOLTage[:DC], CURRent[:DC], or RESistance and <Y> is
1 or 2.
Note that this only available for two limits in the Model 2461.
:CALCulate2:LIMit<x>:UPPer:SOURce2
:CALCulate2:LIMit<x>:UPPer:SOURce2?
Not available
Appendix D: Convert Model 2400 to Model 2461 code
(on page 6-29), where <function> is
:SYSTem:CCHeck:ALL?
(on page 6-30), where
(on page 6-32), where <function>
(on page 6-33), where
(on page 6-
D-9
Advertisement
Table of Contents
