Keithley 2461 Reference Manual page 1088

Appendix D: Convert Model 2400 to Model 2461 code
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
Model 2400 command
Model 2461 command
Notes
D-16
Model 2461 Interactive SourceMeter® Instrument Reference Manual
[:SENSe[1]]:FUNCtion:OFF
[:SENSe[1]]:FUNCtion:OFF?
Not available
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion:OFF:ALL
Not available
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion:OFF:COUNt?
Not available
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion[:ON]
[:SENSe[1]]:FUNCtion[:ON]?
[:SENSe[1]]:FUNCtion[:ON]
[:SENSe[1]]:FUNCtion[:ON]?
Does not support a list parameter in the Model 2461
[:SENSe[1]]:FUNCtion[:ON]:ALL
Not available
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion[:ON]:COUNt?
Not available
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion:STATe?
[:SENSe[1]]:FUNCtion[:ON]?
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion[:ON]? queries the active measurement function.
[:SENSe[1]]:RESistance:HOLDoff
[:SENSe[1]]:RESistance:HOLDoff?
Not available
[:SENSe[1]]:RESistance:HOLDoff:DELay
[:SENSe[1]]:RESistance:HOLDoff:DELay?
Not available
[:SENSe[1]]:RESistance:MODE
[:SENSe[1]]:RESistance:MODE?
[:SENSe[1]]:<function>:UNIT
[:SENSe[1]]:FUNCtion[:ON]
[:SENSe[1]]:<function>:MODE, where <function> is RESistance.
For detail about the options that are available with these settings, see
resistance measurements (on page 2-105).
(on page 6-81)
(on page 6-72) (set to OHM)
(on page 6-81) (set to RESistance)
2461-901-01 A/November 2015
Making