Keithley 2461 Reference Manual page 1049

Model 2461 Interactive SourceMeter® Instrument Reference Manual
Standard Event Register
The Standard Event Register set includes two 8-bit registers:
•
Standard Event Status Register: Reports when a predefined event has occurred. The register
latches the event and the corresponding bit remains set until it is cleared by a read.
•
Standard Event Status Enable Register: You can enable or disable bits in this register. This
allows the predefined event (from the Standard Event Status Register) to set the ESB of the
Status Byte Register.
2461-901-01 A/November 2015
Figure 185: Model 2461 Standard Event Register
Appendix C: Status model
C-3